Tag Archives: Conveyor Chain Manufacturer

China Hot selling Gearbox Belt Conveyor Roller Chains Driving Chains Transmission Stainless Steel Chain and Sprocket Kit Oil Industry Gears Bevel Gear manufacturer

Product Description

SPROCKET  1/2” X 5/16”  08B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

BASIC INFO.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

 

INSTALLATION AND USING

The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 
 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Mining Machinery, Sugar Machinery
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Alloy
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Gear

The Difference Between Planetary Gears and Spur Gears

A spur gear is a type of mechanical drive that turns an external shaft. The angular velocity is proportional to the rpm and can be easily calculated from the gear ratio. However, to properly calculate angular velocity, it is necessary to know the number of teeth. Fortunately, there are several different types of spur gears. Here’s an overview of their main features. This article also discusses planetary gears, which are smaller, more robust, and more power-dense.
Planetary gears are a type of spur gear

One of the most significant differences between planetary gears and spurgears is the way that the two share the load. Planetary gears are much more efficient than spurgears, enabling high torque transfer in a small space. This is because planetary gears have multiple teeth instead of just one. They are also suitable for intermittent and constant operation. This article will cover some of the main benefits of planetary gears and their differences from spurgears.
While spur gears are more simple than planetary gears, they do have some key differences. In addition to being more basic, they do not require any special cuts or angles. Moreover, the tooth shape of spur gears is much more complex than those of planetary gears. The design determines where the teeth make contact and how much power is available. However, a planetary gear system will be more efficient if the teeth are lubricated internally.
In a planetary gear, there are three shafts: a sun gear, a planet carrier, and an external ring gear. A planetary gear is designed to allow the motion of one shaft to be arrested, while the other two work simultaneously. In addition to two-shaft operation, planetary gears can also be used in three-shaft operations, which are called temporary three-shaft operations. Temporary three-shaft operations are possible through frictional coupling.
Among the many benefits of planetary gears is their adaptability. As the load is shared between several planet gears, it is easier to switch gear ratios, so you do not need to purchase a new gearbox for every new application. Another major benefit of planetary gears is that they are highly resistant to high shock loads and demanding conditions. This means that they are used in many industries.

They are more robust

An epicyclic gear train is a type of transmission that uses concentric axes for input and output. This type of transmission is often used in vehicles with automatic transmissions, such as a Lamborghini Gallardo. It is also used in hybrid cars. These types of transmissions are also more robust than conventional planetary gears. However, they require more assembly time than a conventional parallel shaft gear.
An epicyclic gearing system has three basic components: an input, an output, and a carrier. The number of teeth in each gear determines the ratio of input rotation to output rotation. In some cases, an epicyclic gear system can be made with two planets. A third planet, known as the carrier, meshes with the second planet and the sun gear to provide reversibility. A ring gear is made of several components, and a planetary gear may contain many gears.
An epicyclic gear train can be built so that the planet gear rolls inside the pitch circle of an outer fixed gear ring, or “annular gear.” In such a case, the curve of the planet’s pitch circle is called a hypocycloid. When epicycle gear trains are used in combination with a sun gear, the planetary gear train is made up of both types. The sun gear is usually fixed, while the ring gear is driven.
Planetary gearing, also known as epicyclic gear, is more durable than other types of transmissions. Because planets are evenly distributed around the sun, they have an even distribution of gears. Because they are more robust, they can handle higher torques, reductions, and overhung loads. They are also more energy-dense and robust. In addition, planetary gearing is often able to be converted to various ratios.
Gear

They are more power dense

The planet gear and ring gear of a compound planetary transmission are epicyclic stages. One part of the planet gear meshes with the sun gear, while the other part of the gear drives the ring gear. Coast tooth flanks are used only when the gear drive works in reversed load direction. Asymmetry factor optimization equalizes the contact stress safety factors of a planetary gear. The permissible contact stress, sHPd, and the maximum operating contact stress (sHPc) are equalized by asymmetry factor optimization.
In addition, epicyclic gears are generally smaller and require fewer space than helical ones. They are commonly used as differential gears in speed frames and in looms, where they act as a Roper positive let off. They differ in the amount of overdrive and undergearing ratio they possess. The overdrive ratio varies from fifteen percent to forty percent. In contrast, the undergearing ratio ranges from 0.87:1 to 69%.
The TV7-117S turboprop engine gearbox is the first known application of epicyclic gears with asymmetric teeth. This gearbox was developed by the CZPT Corporation for the Ilyushin Il-114 turboprop plane. The TV7-117S’s gearbox arrangement consists of a first planetary-differential stage with three planet gears and a second solar-type coaxial stage with five planet gears. This arrangement gives epicyclic gears the highest power density.
Planetary gearing is more robust and power-dense than other types of gearing. They can withstand higher torques, reductions, and overhung loads. Their unique self-aligning properties also make them highly versatile in rugged applications. It is also more compact and lightweight. In addition to this, epicyclic gears are easier to manufacture than planetary gears. And as a bonus, they are much less expensive.

They are smaller

Epicyclic gears are small mechanical devices that have a central “sun” gear and one or more outer intermediate gears. These gears are held in a carrier or ring gear and have multiple mesh considerations. The system can be sized and speeded by dividing the required ratio by the number of teeth per gear. This process is known as gearing and is used in many types of gearing systems.
Planetary gears are also known as epicyclic gearing. They have input and output shafts that are coaxially arranged. Each planet contains a gear wheel that meshes with the sun gear. These gears are small and easy to manufacture. Another advantage of epicyclic gears is their robust design. They are easily converted into different ratios. They are also highly efficient. In addition, planetary gear trains can be designed to operate in multiple directions.
Another advantage of epicyclic gearing is their reduced size. They are often used for small-scale applications. The lower cost is associated with the reduced manufacturing time. Epicyclic gears should not be made on N/C milling machines. The epicyclic carrier should be cast and tooled on a single-purpose machine, which has several cutters cutting through material. The epicyclic carrier is smaller than the epicyclic gear.
Epicyclic gearing systems consist of three basic components: an input, an output, and a stationary component. The number of teeth in each gear determines the ratio of input rotation to output rotation. Typically, these gear sets are made of three separate pieces: the input gear, the output gear, and the stationary component. Depending on the size of the input and output gear, the ratio between the two components is greater than half.
Gear

They have higher gear ratios

The differences between epicyclic gears and regular, non-epicyclic gears are significant for many different applications. In particular, epicyclic gears have higher gear ratios. The reason behind this is that epicyclic gears require multiple mesh considerations. The epicyclic gears are designed to calculate the number of load application cycles per unit time. The sun gear, for example, is +1300 RPM. The planet gear, on the other hand, is +1700 RPM. The ring gear is also +1400 RPM, as determined by the number of teeth in each gear.
Torque is the twisting force of a gear, and the bigger the gear, the higher the torque. However, since the torque is also proportional to the size of the gear, bigger radii result in lower torque. In addition, smaller radii do not move cars faster, so the higher gear ratios do not move at highway speeds. The tradeoff between speed and torque is the gear ratio.
Planetary gears use multiple mechanisms to increase the gear ratio. Those using epicyclic gears have multiple gear sets, including a sun, a ring, and two planets. Moreover, the planetary gears are based on helical, bevel, and spur gears. In general, the higher gear ratios of epicyclic gears are superior to those of planetary gears.
Another example of planetary gears is the compound planet. This gear design has two different-sized gears on either end of a common casting. The large end engages the sun while the smaller end engages the annulus. The compound planets are sometimes necessary to achieve smaller steps in gear ratio. As with any gear, the correct alignment of planet pins is essential for proper operation. If the planets are not aligned properly, it may result in rough running or premature breakdown.

China Hot selling Gearbox Belt Conveyor Roller Chains Driving Chains Transmission Stainless Steel Chain and Sprocket Kit Oil Industry Gears Bevel Gear manufacturer China Hot selling Gearbox Belt Conveyor Roller Chains Driving Chains Transmission Stainless Steel Chain and Sprocket Kit Oil Industry Gears Bevel Gear manufacturer
editor by CX 2023-05-19

Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Conveyor C2050 Conveyor Chain in Tirupati India Belting Pipe Rubber Conveyor Belt for Mine with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Conveyor C2050 Conveyor Chain in Tirupati India  Belting Pipe Rubber Conveyor Belt for Mine with ce certificate top quality low price

We – EPG Team the biggest Chain and agricultural gearbox manufacturing facility in China with 5 distinct branches. For far more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

EPG has been productively accredited by ISO9002 High quality Administration Technique, ISO9001 Quality Management System, API certification, ISO/TS16949:2002 and ISO10012 measurement management program. ISO Our goods are utilized in several fields.9001:2000 licensed. Stocking distributor of electricity transmission items such as roller & numerous strand roller chains. Merchandise also consist of brakes, drive elements, gears, torque limiters, U-joints, pulleys, sheaves, encoders, belt drives, clutches & motors are also obtainable. Normal solitary-strand roller chain, standardized by ASME, is an assembly of alternating pin links and roller backlinks. The distance amongst pin centers is referred to as the pitch. The pitch is what categorizes the dimension of the chain. The greater the pitch, the increased the load score. Chains with tiny pitches have smaller sized loads, operate a lot more quietly, and at higher speeds. Multi-strand, tiny-pitch roller chains are a very good answer for higher-load, higher-speed apps.

ZheJiang Shengrun Rubber Co.Ltd ( SR Belting ) is a producer which has specialised in producing conveyor belt for more than twenty years. Merchandise are utilized in mining, coal ,port, metallurgy, cement, transportation and hoisting of resources.

SR Belting always strives to assure the protection of conveyor belt to meet and exceed beyond the national stHangZhourds and customers satisfactions with its items. SR Belting has acquired ISO9001,ISO24001 and ISO28001 certifications.

SR Belting manufactures conveyor belts based on customers’ requirements as Worldwide ISO, German DIN, SANS and RMA and so on.

We have a unbiased style, research and advancement capabilities and can be custom-made to consumer requirement.
Our company possesses a full established of detection products, the impartial chemical analysis and actual physical labs, guaranteeing all the raw materia EPT to offer exceptional good quality products. 

We sincerely welcome friends at home and abroad to check out our manufacturing unit to discuss cooperation and company business.

Our companions:CHINA SHENHUA, CNBM, SINOMA, LAFARGE, SHOUGANG Team, CHINA HUANENG 

EXPO:

Pipe Rubber EPT Belt For Mine Transportation

Building:
Utilizing substantial tesion cloth and steel cord as the belt reinforcement, and lined top and bottom with good good quality abrasion resistant rubber compound. The belt gradually roll into type U and last but not least into type tubular  during operation, conveying materia EPT under a hermitic situation.

Belt Software:
suitale for conveying materia EPT in developing, mining,electricity plants, chemical business, cement, grain and so on.

Positive aspects:
Area-preserving, much less pollution, operating efficiency, low upkeep.
Higher tension anti-tearing reinforcement enhance warmth resistant qualities and service daily life

SR Belting Enterprise FAQ

Q:What is your creation capacity?

A:SR Belting has eleven creation lines and its potential is 5000meters per day.

Q:How about your guide time?

A: It is 20 ~ 25days for standard belts.

Q: What is your M.O.Q ?

A: M.O.Q is 1*20GP.  The less quantity is okay but its co EPT will be larger.

Q: Do you have belt warranty?

A: At lea EPT 12months services lifestyle for normal belt. HR T4+ belt 3~6month.

Q: What certificates do you have ?

A: SR Belting has received ISO9001,ISO24001 and ISO28001 certifications.

 

The use of authentic tools manufacturer’s (OEM) part numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our firm and the detailed substitute elements contained herein are not sponsored, approved, or manufactured by the OEM.

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Conveyor C2050 Conveyor Chain in Tirupati India  Belting Pipe Rubber Conveyor Belt for Mine with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Conveyor C2050 Conveyor Chain in Tirupati India  Belting Pipe Rubber Conveyor Belt for Mine with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Conveyor C2050 Conveyor Chain in Tirupati India  Belting Pipe Rubber Conveyor Belt for Mine with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Conveyor C2050 Conveyor Chain in Tirupati India  Belting Pipe Rubber Conveyor Belt for Mine with ce certificate top quality low price

Best made in China – replacement parts – pintle Chain & sprocket manufacturer : China 24B-2 Sharp Top Roller Chain With 4-Points Every Pitch in Rostov-on-Don Russian Federation Chain Manufacturer Iron Chain Hardened Steel Chain Scraper Conveyor with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : China 24B-2 Sharp Prime Roller Chain With 4-Points Each Pitch in Rostov-on-Don Russian Federation  Chain Producer Iron Chain Hardened Steel Chain Scraper Conveyor with ce certificate best good quality reduced price

We – EPG Group the most significant Chain and agricultural gearbox factory in China with 5 distinct branches. For a lot more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

EPG is a skilled manufacturer and exporter that is involved with the design, improvement and manufacturing.We’ve Fantastic attention has been paid on environmental safety and power preserving. built up our solution assortment to answer to the vastly various conditions discovered in distinct industrial environments around the world. From hefty industry to precision manufacturing, we function with end-users in practically each industry and have specialist solutions which are proven to provide a distinctive functionality benefit for your application. ISO 9001, ISO/TS 16949 and AS9100 licensed. Producer of common and personalized roller chains for use in a extensive variety of applications. Roller chains are available in solitary-pitch, double-pitch and precision versions. Satisfies or exceed ANSI requirements.

China chain maker iron chain hardened steel chain scraper conveyor

 

  EPT Products        
Software/Services Spot
  Metal Areas Solution for Car, Agriculturemachine, Building Machine, transportation equipment, Valve and Pump method, EPT machine metal Elements, motor bracket, truck chassis bracket, gear box , gear housing , gear cover, shaft, spline shaft , pulley, flange, link pipe, pipe, hydraulic valve , valve housing ,Fitting , flange, wheel, fly wheel, oil pump housing, starter housing, coolant pump housing, transmission shaft , transmission gear, sprocket, chains and so on.
 Main blank Approach for Forged elements  Forging , Press
 Blanks Tolerance +/-.3~+/-2 mm
 Applicable Materials Carbon steel, Lower Carbon metal, middle carbon metal,  40Cr, 20CrMnTi, 20CrNiMo and so on.
  Forging Blank Size  /Proportions  142 mm- 300mm  or according to consumer need
  Blanks Weight Assortment from .1kg-1000kg
 Applicable Machining Process CNC Machining/ Lathing/ Milling/ Turning/ Boring/ Drilling/ Tapping/ Broaching/Reaming and so on.
 
 Machining Tolerance From .005mm-.01mm-.1mm
 Machined Surface area Good quality Ra .8-Ra3.2 according to buyer prerequisite
 Applicable Heat Treatment Normalization , quenching and tempering, Circumstance Hardening, Nitriding, Carbon Nitriding, Induction Quenching
 Applicable Complete Surface  Treatment Shot/sand blast, sharpening, Area passivation, Primer Painting , Powder coating, ED- Coating, Chromate Plating, zinc-plate, Dacromat coating, Finish Portray,
 MOQ For forged parts : 1 Ton
For Machining: fifty Pcs
 Lead Time 45days from the receipt date of deposit for EPT Scraper Chain

contact us

FAQ:

1. Are you a manufacturer or a trading company?
We are a professional company with over 15 years’ export knowledge for designing and generating motor vehicle machinery elements.
 
2. How can I get some samples? 
If you need, we are glad to supply you samples for free, but the new clients are envisioned to shell out the courier expense, and the charge will be deducted from the payment for formal order.
 
three. Can you make casting in accordance to our drawing?
Yes, we can make casting in accordance to your drawing, 2d drawing, or 3D cad model. If the 3D cad model can be provided, the advancement of the tooling can be much more successful. But with no 3D, dependent on 2d drawing we can even now make the samples appropriately approved.
 
four. Can you make casting dependent on our samples?
Of course, we can make measurement based on your samples to make drawings for tooling producing.
 
five. What is your quality control gadget in home?
We have spectrometer in residence to keep an eye on the chemical residence, tensile te EPT equipment to management the mechanical property and EPT Sonic as NDT examining method to manage the casting detect beneath the area of casting.

ZheJiang EPT EPT Manufacture Company Ltd.
Department of EPT Sector Ltd.
Incorporate: RM 620, No 4TH, XIHU (WEST LAKE) DIS.G MANSION, LANE 5000 XIHU (WEST LAKE) DIS.XING RD, ZheJiang CHINA
Mobile: +86~13083988828: 21 56076732/5157156
Fax: 21 56496490 / 65717106
Mob:13671966510
 
 
 
World wide web: http://
 

The use of original tools manufacturer’s (OEM) portion figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our organization and the outlined replacement areas contained herein are not sponsored, accredited, or made by the OEM.

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : China 24B-2 Sharp Best Roller Chain With 4-Points Each and every Pitch in Rostov-on-Don Russian Federation  Chain Producer Iron Chain Hardened Steel Chain Scraper Conveyor with ce certificate top high quality minimal price tag

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : China 24B-2 Sharp Best Roller Chain With 4-Factors Every Pitch in Rostov-on-Don Russian Federation  Chain Producer Iron Chain Hardened Steel Chain Scraper Conveyor with ce certificate prime high quality reduced value

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : China 24B-2 Sharp Leading Roller Chain With 4-Points Every Pitch in Rostov-on-Don Russian Federation  Chain Manufacturer Iron Chain Hardened Steel Chain Scraper Conveyor with ce certificate prime top quality lower cost

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : China 24B-2 Sharp Leading Roller Chain With 4-Details Every single Pitch in Rostov-on-Don Russian Federation  Chain Company Iron Chain Hardened Steel Chain Scraper Conveyor with ce certification best good quality reduced price tag

Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Oxidation 3232 Chain | Traveling water screen chain in Lusaka Zambia Treatment Carbon Steel Conveyor Chain with ce certificate top quality low price

<img src="https://img.hzpt.com/uploads/images/sprocketpulleygearbox-ali/H66244b8149c942adb52a443fbf847335P.jpg" alt="Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Oxidation 3232 Chain Group the most significant Chain and agricultural gearbox manufacturing unit in China with 5 diverse branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

EPG has been productively qualified by ISO9002 High quality Administration Program, ISO9001 Good quality Management Technique, API certificate, ISO/TS16949:2002 and ISO10012 measurement management program. EPG EPG is a professional maker and exporter that is involved with the design, advancement and production.roller chain satisfies or exceeds ANSI requirements and is produced in ISO licensed factories. As is the scenario with our pillow block bearings and ball bearings, our roller chain components are examined prior to shipment to insure top quality. The roller chain elements and roller chains we offer are pre-stretched to insure you have minimal sag. It also arrives with sound rollers, making sure that it is of the optimum top quality. EPG is a top provider of high quality, cost-successful energy transmission parts. As our merchandise strains proceed to expand to meet our customer’s requirements, our commitment to individualized customer service and on-time supply stays second to none.
Chain skilled manufacturer

Chain Kind Welded chain,                    Roller chain,          
Hollow pin chain ,               Drawbench chain,    
Leaf chain,                         EPT chain,
Paver chain,                       Bucket elevator chain,
Skid chain,                         Sugar mill chain,     
Double flex chain,              Sharp leading chain,   
Solid chain,                   Ca EPT chain ,   
FV/FVC/FVT series chain,           
M/MVT/MC serise chain,                         
Z/ZC serise chain,                             
stainless steel chain ,
Sprocket
Material carbon steel or Alloy with heat treatment method /stainless steel                                                                                               (by way of harden/case  harden/induction harden)
Floor shot peening                                                           
zinc-plated         
Dacromet            
blacking                                      
lubricating ,free of charge of rust
Top quality inspection inspect length precision and hardness,                     
pre-stretching right after assembling,
Bundle polybag+plywood case
 
Application sugar mill,
cement mill metallurgy industry,
Car: +86~13083988828 business
,grain equipment.
mining machine  and so on

For a lot more than 20 many years, we have centered on customized chains.

For more than 20 many years, We have done hundreds of diverse types of industrial chains.

So we have a prosperity of custom made chain expertise.

Below are some of the varieties of the chains.

Why Pick DCC?

1. EPT chain transmission manufacturing co.,Ltd is a expert manufacture of chains,and is the member device of China National specialized committee for stHangZhourdization for china transmission,

two.we occupied an area over 100 thousand sqm,owned stHangZhourd workshops in excess of 30 hundreds sqm and over 300sets of expert equipments to create chains in big-scale as effectively as complete inspection and te EPT gadgets.

three.we handed by means of the authentications of ISO9001:2000 worldwide high quality method and ISO14001 environmental administration method .

four,we have 75% of items which are exported to Europe,The us,Japan , Southea EPT Asia ,and so on,

five.twelve a long time manufacturing facility encounter,practically all the areas are developed by our personal factory,therefor we can control the co EPT and top quality.

Choose DCC,you choosed High good quality , aggressive value,perfect support,

want we will advertise company as well as friendship!

The use of first tools manufacturer’s (OEM) portion numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our firm and the detailed substitute elements contained herein are not sponsored, accepted, or produced Traveling water screen chain in Lusaka Zambia Treatment Carbon Steel Conveyor Chain with ce certificate top quality low price”>

<img src="http://img.hzpt.com/banner/chain2.jpg" alt="Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Oxidation 3232 Chain